The modified 11 ½ linge VB – 24A Automatic movement is fitted with 26 jewels, balance pivots and jewel bearings that support a watch balance wheel are fragile in comparison to the mass they must support, and without shock protection are the part of the watch most likely to be damaged under impact. The VB 24A Automatic movement is fitted with a Incabloc system uses a “lyre-shaped” spring to allow the delicate bearings to shift in their settings under impact, until a stronger shoulder of the staff contacts the strong metal end piece, so that the pivots and bearings don’t have to bear the force of the impact. When the impact is over, the springs guide the parts back to their original positions. The staff itself does not move relative to the jewel bearing, but the whole bearing is carried in a metal bushing that is free to move in the metal end piece, under the control of the spring thus protecting your watch from accidental impact damage.
The term “Automatic” refers to the watch movement function. The self-winding mechanical VB 24A movement does not need to be wound up on a daily bases whoever this depends on the wrist movements of the wearer. When fully wound, the watch will have a power reserve between 32 and 38 hours. Since the watch’s self-winding mechanism is directly linked to the wearer’s activity, 10 to 12 hours per day’ wear should be sufficient to generate a power reserve of 20 hours or more, which ensures that the watch will continue to run throughout the night. However, if a watch has not been worn for several days and its power reserve has thus run low, we recommend you wind the watch manually for around 15 rotations of the crown (clockwise) to ensure the best possible rate from the outset.
Van Brauge watches uses Super-LumiNova material for the dials and hands of its watches. The hand and the hour index indicators use Super-LumiNova. The Super-LumiNova material takes its luminosity from daylight or any artificial source of light. The watch should therefore be exposed to bright light in order to ensure the luminosity of the dial and hands in the dark. The colour of the Super-LumiNova material is different on our verious watch models from C1 – White / Green, C3 – Light Green / Green, C7 – Green / Green.
A water-resistance check every eighteen months is the best way guarantee the water resistance and is recommended. A complete service is recommended every four to five years to ensure the time keeping of your watch remains stable. During the service the mechanical parts of the movement that need replacing due the wear will be included in the service cost. A new crown will be fitted free of charge and the case polished or brushed depending on which model you have will be included in the price.
This can happen, sapphire crystal are extremely scratch resistant (only diamond can scratch them). They are also very hard which can make them brittle. If you drop your watch onto a ceramic tiled bathroom floor you may break the crystal. This is not covered by the guarantee. We can replace the sapphire crystal, however we recommend that the watch be serviced because shards of crystal may have entered into the movement. Charges will be incurred.
If you have a bad accident and you have badly damaged your case and it needs replacing we will replace the case if you accept the charges for the new case. Any case defects caused by manufacturing will be replaced free of charge.
The care that we devote to the production of Van Brauge Everglade Alligator leather watch straps and the tests that we carry out on them ensure that they are of the highest quality. In normal conditions of use a Van Brauge leather strap enjoys an average lifespan of between six and twelve months. This varies according to the conditions, the regularity and the environment of its use. For example, contact with water could cause premature wear and tear of the strap. We have provided you with two straps for your watch we suggest that you change between the two to enhance the life span of your straps and to keep a fresh look to your watch.
If you have damaged your stainless steel or 18K gold buckle on your leather strap and you want to have it replaced. we can sell you a new stainless steel buckle and we have the possibility to repair the 18K Gold buckle.
For bracelets unless the bracelet is suffering from generalised wear and tear. It would not be right for us to carry out (and invoice) this repair when we know from experience that the new buckle will not hold if the rest of the bracelet is already in worn condition. Therefore we would replace the buckle free of charge.
All watches bought from our online store www.vb-watches.com or through our authorised boutique dealers and are accompanied by the Van Brauge international warranty booklet are guaranteed against any manufacturing defect for an unlimited time period. More than 24 months after the date of purchase, the labour involved in all repairs will be invoiced to you, together with the replacement of parts.